ScoliBrace® is a unique scoliosis bracing method using the best corrective principles from other current bracing methods. Used in conjunction with 3D imaging software, BraceScan, scans of the patient are taken and the brace is customised to fit their unique measurements and needs.
By positioning the body and spine in their over-corrected or mirror image position, the ScoliBrace can have a super-corrective effect. Curve reductions are achieved in the majority of case, as well as improvements to rib humping, shoulder level and the overall appearance of the body.
3D Designed for a 3D Condition
Scoliosis is a 3 dimensional condition. Effective treatments need to be 3 dimensional too. ScoliBrace is created from 3D bodyscans in conjunction with x-rays and posture photos. Each brace is then designed using Computer Aided Design (CAD) software and custom made.
ScoliBrace opens and closes at the front making it easy to wear and remove without assistance. There is a variety of colours and patterns available for patients to personalise the look of their brace.
Case Study of a Patient Aged 17 with Scoliosis Curve Measured 44 Degrees Reduced to 29 Degrees
Patient presented to the Sydney Scoliosis Clinic aged 17 at the time of initial examination. Adolescent Idiopathic Scoliosis was diagnosed 18 months earlier and no treatment was undertaken during this time. At the initial consultation the scoliosis curve measured 44 degrees. This patient had seen a surgeon and was recommended to undergo surgery.
She reported having bad back pain (7-8/10) most days. The pain was worse after dance classes. The patient was on track to become a professional ballet dancer however the pain and the effect of the scoliosis on the body posture and the effect that surgery would have on the spinal flexibility meant that this future career was at risk.
A combination of part-time rigid bracing using the mirror image ScoliBrace and the ScoliBalance scoliosis rehabilitation approach based on the SEAS principles was recommended. It was recommended to use the ScoliBrace for 6-8 hours per day and to do the ScoliBalance exercises twice per day for 20 minutes. This intensive regime was recommended for 3-6 months.
As can be seen from the photos, a cosmetic improvement in the body was seen within the first 4 weeks. This improvement was maximised at 6 months. After the end of intensive treatment, the body posture settled to its new corrected position which is demonstrated at the 12 months photo.
At the 12 month mark an x-ray was taken with an independent radiology clinic with the patient standing in her relaxed normal posture. This shows a significant improvement in the scoliosis curve and the alignment of the spine. The curve was corrected by 15 degrees, reducing from 44 degrees to 29 degrees.
The patient’s pain was reduced to 2-3/10 and was only present on an occasional basis. As the body posture improved so did the performance at ballet. At the end of the intensive part of the treatment program the patient was selected to join a top ballet institution overseas. As a result of these improvements surgery was cancelled.
This case demonstrates the potential for a combination of the mirror image ScoliBrace and ScoliBalance rehabilitation program to improve the cosmetic look of the body, the spinal alignment and degree of curve, and the pain associated with the scoliosis. Although relatively mature this patient was able to achieve 15 degrees of correction of her curve.
Although this may not be achievable in every case it shows that in cases where the patient is flexible and there is an aspect of the scoliosis that is not fixed it is possible to make correction even after growth has finished. Continuation of the ScoliBalance exercises may be required to maintain the correction.
In this case it was possible to reduce a large curve that was at a surgical level to a moderate curve no longer in need of surgery. Choosing the right treatment to achieve the goals of cosmetic improvement, curve reduction, and pain relief was successful in this case.